Fence Installation in Pflugerville, TX
Many Pflugerville neighborhoods built in the 1990s and 2000s still have their original wood-post fences, and 20–30 years of clay movement have worn them out. Austin Texas Fencing replaces them with new fences on galvanized steel posts, including in Falcon Pointe and Blackhawk. We install new fences only; we don’t repair, stain or paint.
Get a free estimateCall (512) 749-7243
Fence Types We Install in Pflugerville, TX
- Cedar Fence Installation
- Privacy Fence Installation
- Wood Fence Installation
- Iron Fence Installation
- Chain Link Fence Installation
- Vinyl Fence Installation
- Aluminum Fence Installation
- Wrought Iron Fence Installation
- Horizontal Fence Installation
- Pool Fence Installation
- Commercial Fence Installation
- Composite Fence Installation
- Farm & Ranch Fence Installation
- Picket Fence Installation
- Residential Fence Installation
Pflugerville Neighborhoods and HOAs
Pflugerville grew quickly in the 1990s and 2000s as a more affordable alternative to Austin’s core suburbs, and in established neighborhoods like Windermere, Brookfield and Sorento the original fences are aging. Falcon Pointe and Blackhawk are newer, with active HOAs. Another wave of building came in the 2010s along the SH 130 corridor on the east side, where Stone Hill Town Center is the commercial core. Lake Pflugerville is the center of the city’s park system and one of the area’s most recognizable landmarks.
Neighborhoods and communities we serve in Pflugerville: Windermere, Brookfield, Sorento, Falcon Pointe, Blackhawk, Spring Trails, Carmel, Highland Park
Every Pflugerville address is inside our service area, as is the rest of northern Travis County; call (512) 749-7243 if you’d like to confirm yours.
Built for Travis County Conditions
Pflugerville sits on Travis County Blackland Prairie clay, the same formation that runs through North Austin and the eastern metro. After 20–30 years of the clay expanding and contracting, wood fence posts here are typically cracked, rotated or starting to pull away from their concrete. A new fence on galvanized steel posts set in fresh concrete gives you a sound structural base again. We set post depth from the actual soil conditions on your property instead of a generic standard.
Every residential and commercial fence follows the same five steps, from the free on-site estimate to cleanup. See how we build every fence.
Fence Permits in Pflugerville, TX
A fence inside Pflugerville city limits follows City of Pflugerville rules, which usually require a permit when height, front-yard or corner-lot placement, a floodplain or a pool barrier is involved. In Falcon Pointe, Blackhawk and Pflugerville’s other HOA communities you also need HOA approval, separate from the city permit.
Why Austin Texas Fencing
North Travis County Clay Experience
Pflugerville’s original 1990s–2000s fences have sat through decades of Blackland Prairie clay expanding and contracting. We set new galvanized steel posts in concrete at the depth that soil requires.
Pflugerville HOA Knowledge
Falcon Pointe, Blackhawk and Spring Trails each set their own fence requirements.
New Installation Only
If you need a repair, stain or paint job, we’re not the right company.
Other Cities We Serve Near Pflugerville
- Austin, TX
- Bastrop, TX
- Buda, TX
- Cedar Park, TX
- Del Valle, TX
- Elgin, TX
- Georgetown, TX
- Hutto, TX
- Kyle, TX
- Leander, TX
- Manor, TX
- Round Rock, TX
- Taylor, TX
Typical Pflugerville Projects
| Project | Scope | Typical timeline | Typical cost |
|---|---|---|---|
| Falcon Pointe replacement | 170 ft: 6 ft cedar privacy on steel posts replacing a wood-post fence, one walk gate | 2–3 days | $3,500–$6,500 |
| Blackhawk backyard | 120 ft: 6 ft horizontal cedar, one walk gate | 2–3 days | $4,300–$7,800 |
| Side and back yard | 150 ft: 4 ft galvanized chain link, one walk gate | 1–2 days | $1,600–$3,600 |
Typical examples, not quotes. Costs use the installed ranges in our Austin fence cost guide, gates included; removing an old fence is quoted separately.
Questions About Fence Installation in Pflugerville, TX
Do you work in Falcon Pointe and Blackhawk in Pflugerville?
Yes. Falcon Pointe and Blackhawk are among Pflugerville’s most HOA-active communities, and both set requirements for approved fence materials, heights and styles. On every project we review HOA compliance before installation.
Does Pflugerville require a fence permit?
Inside city limits, a permit is usually needed when the fence involves height, front-yard or corner-lot placement, a floodplain or a pool barrier; the City of Pflugerville sets those rules. If your home is in an HOA community, you’ll need HOA approval too, separate from any city permit.
My fence in Pflugerville is leaning: do I need repair or replacement?
Usually replacement. Most leaning fences in Pflugerville’s older neighborhoods lean because their wood posts have failed in Blackland Prairie clay, and if the posts are cracked, rotated at the base or pulling away from their original footings, the fence needs a full replacement rather than a repair. We only do new installation, not repairs. At the free estimate we can look at the posts and tell you what’s actually causing the lean.
How much does fence installation cost in Pflugerville?
Cedar privacy fence in Pflugerville typically runs $20–$35 per linear foot installed. Of the other materials, chain link is the most affordable option, and vinyl, aluminum and wrought iron run higher. We come out for a free on-site estimate on any Pflugerville property. See the Austin fence cost guide.
Do you do fence repairs in Pflugerville?
No. Our work in Pflugerville is new fence installation only.
Free Estimate