Fence Installation in Taylor, TX
The Samsung semiconductor campus has brought new subdivisions to Taylor, and they sit alongside the historic downtown neighborhoods. Austin Texas Fencing installs new fences in both, on Taylor’s black clay. We install new fences only; we don’t repair, stain or paint.
Get a free estimateCall (512) 749-7243
Fence Types We Install in Taylor, TX
- Cedar Fence Installation
- Privacy Fence Installation
- Wood Fence Installation
- Iron Fence Installation
- Chain Link Fence Installation
- Vinyl Fence Installation
- Aluminum Fence Installation
- Wrought Iron Fence Installation
- Horizontal Fence Installation
- Pool Fence Installation
- Commercial Fence Installation
- Composite Fence Installation
- Farm & Ranch Fence Installation
- Picket Fence Installation
- Residential Fence Installation
Taylor Neighborhoods and HOAs
Taylor’s residential areas are splitting into two distinct zones. The historic city core (Old Town Taylor, Heritage Park and the downtown square area along Murphy Park) has established homes on older lots, with more permit flexibility and less HOA oversight. Out along SH 79 and County Road 365, new master-planned developments are going up as Samsung employees relocate and the supplier buildout tied to the campus follows. Rural and agricultural properties around the city are still common, and the SH 79 corridor is Taylor’s main commercial road.
Neighborhoods and communities we serve in Taylor: Taylor Old Town, Heritage Park, Mustang Creek, Parkside at Taylor, Taylor Crossing, Mallard Park, Taylor Ranch
If you aren’t sure we cover your address, call us at (512) 749-7243. Our Taylor work reaches every part of the city and the rest of eastern Williamson County.
Built for Williamson County Conditions
Taylor sits on Williamson County Blackland Prairie clay, the same heavy, expansive soil that runs through eastern Williamson County and into East Austin. It soaks up rainfall and swells, then contracts hard in summer drought, and it goes through that movement over and over each year. Farmland around Taylor has behaved this way for generations, which is why fence posts on rural properties here need proper anchoring. We set galvanized steel posts in concrete on every installation and adjust post depth to the conditions on your property.
Every residential and commercial fence follows the same five steps, from the free on-site estimate to cleanup. See how we build every fence.
Fence Permits in Taylor, TX
Inside Taylor city limits, the City of Taylor sets the fence rules, and height, front-yard and corner-lot placement, floodplains and pool barriers are what usually trigger a permit. Rural and agricultural properties outside city limits fall under Williamson County jurisdiction. HOA requirements are becoming more common in the growth areas along SH 79 as Taylor’s newer developments build out.
Why Austin Texas Fencing
Williamson County Clay Experience
Taylor’s black clay expands and contracts hard through every seasonal cycle. Galvanized steel posts set in concrete at the right depth hold up in this soil, and wood posts don’t.
Agricultural and Rural Fencing
Taylor is surrounded by a large amount of agricultural land and rural property. Along with standard residential projects, we install farm, ranch, and large-lot perimeter fencing.
New Installation Only
If you need a repair, stain or paint job, we’re not the right company.
Other Cities We Serve Near Taylor
- Austin, TX
- Bastrop, TX
- Buda, TX
- Cedar Park, TX
- Del Valle, TX
- Elgin, TX
- Georgetown, TX
- Hutto, TX
- Kyle, TX
- Leander, TX
- Manor, TX
- Pflugerville, TX
- Round Rock, TX
Typical Taylor Projects
| Project | Scope | Typical timeline | Typical cost |
|---|---|---|---|
| New subdivision backyard | 160 ft: 6 ft cedar privacy, one walk gate | 2 days | $3,300–$6,200 |
| Historic downtown front yard | 80 ft: 4 ft flat-top cedar picket, one walk gate | 1 day | $1,200–$2,300 |
| Rural acreage perimeter | 1,500 ft: 5-strand barbed wire on T-posts with braced corners, one gate | 3–5 days | $4,600–$11,100 |
Typical examples, not quotes. Costs use the installed ranges in our Austin fence cost guide, gates included; removing an old fence is quoted separately.
Questions About Fence Installation in Taylor, TX
Do you install fences near the Samsung facility in Taylor?
Yes. Austin Texas Fencing serves all of Taylor, including the growth areas along SH 79 and County Road 365, where new residential development is concentrated near the Samsung Austin Semiconductor campus. We’ll come out for a free on-site estimate in a newer development or an established neighborhood alike.
Does Taylor require a fence permit?
It can inside city limits, where City of Taylor rules usually call for a permit when height, front-yard or corner-lot placement, a floodplain or a pool barrier is involved. Rural properties outside city limits are under Williamson County jurisdiction and face fewer restrictions. Some of the newer developments are also adding HOA requirements to the process as they build out.
Do you install fences on agricultural and rural properties near Taylor?
Yes. Taylor is surrounded by a large amount of agricultural land, and we install barbed wire, high-tensile, woven wire, and wood board fencing for rural and agricultural use throughout eastern Williamson County. On a larger lot or rural parcel, we’ll come out for a free estimate and look at the terrain and linear footage.
How much does fence installation cost in Taylor?
Cedar privacy fence in Taylor typically runs $20–$35 per linear foot installed. Chain link is the most affordable option, and farm and ranch fencing is priced by linear footage and material type. Estimates are free and on site for every property in Taylor and eastern Williamson County. See the Austin fence cost guide.
Do you do fence repairs in Taylor?
No. Austin Texas Fencing installs new fences only.
Free Estimate